Doored tall unit · 600×2100×580 mm 6 panels · 262 bores · 18 mm MFC · engine-true · Kerf
Inspire
Calibrate
Produce
Manufacture
Install
Act 04 · Manufacture
The piece leaves the screen.
The exact cabinet you configured — now the engine's real assembly, lit on the workshop floor.
你設定的同一件櫃，現在是工程真實的裝配圖，落在工房地面。
Exploded
Every panel is a cut part.
Six panels drift apart along their own axes — sides, top, base, back and door — exactly as Kerf nests them.
六塊板沿各自軸線分離 — 側板、頂、底、背、門 — 正如 Kerf 的排版。
Bore pattern
The 262 bores light up.
Ø35 hinge cups, System-32 shelf lines, Minifix cams and dowels — the real drill map, not decoration.
Ø35 鉸杯、System-32 層板孔、Minifix 偏心件與木銷 — 真實鑽孔圖，非裝飾。
Verify before the saw
Two gates, then a cut.
Every panel runs GATE 1 (drill grid + tooling) and GATE 2 (on-sheet nesting + release) before a blade moves.
每塊板先過 GATE 1（鑽孔格網＋刀具）與 GATE 2（上板排版＋放行），才動刀。
Re-assembled
Back into one object.
The panels close along the same axes — a single manufactured piece, tolerance-checked, ready to leave the floor.
板件沿同一軸線合攏 — 一件公差核對過、可出廠的成品。
Act 05 · Install
It arrives in the flat.
The finished cabinet stands where the photo began — 居屋 to render to factory to your wall, one loop.
成品立在相片開始的地方 — 居屋→效果圖→工廠→你家牆邊，一個循環。
Verify before the saw
GATE 1 · GEOMETRY run
Every bore on the System-32 grid; each hole mapped to a real tool.
GATE 2 · RELEASE run
All parts nested on the 2440×1220 sheet; release confirmed at the engine.
verdict is Kerf's, at post — this beat shows the checks that run, never a stamp the render can't hold
scroll to run the floor ↓
Act 04 · Manufacture
The piece becomes real.
The same cabinet you configured, run through the engine — panels cut, 262 bores drilled, installed in the flat.
The full 3D scroll plays on desktop; here is the story in three engine-true frames.
你設定的同一件櫃，經引擎走一遍 — 開料、鑽 262 個孔、裝進單位。完整 3D 走位在桌面播放，這裡用三張引擎真實畫面講完整個故事。
01 · ExplodedEvery panel is a cut part.Six panels — sides, top, base, back, door — exactly as Kerf nests them · 六塊板，正如 Kerf 排版02 · Bore pattern262 bores light up.System-32 shelf line + Minifix joinery, verified before the saw · 上機前先驗孔位03 · InstalledIt arrives in the flat.The finished cabinet, standing where the photo began · 完工櫃立在相片開始的地方
Your phone safely holds one live 3D scene, so we show the stills here — open on desktop for the full scroll.
手機只安全承載一個即時 3D 場景，這裡顯示靜態圖 — 桌面開啟可看完整走位。
